Categories 4
Product Result
-
ITEM NO : 2086693
Polishing Belt Fine
BRAND : FEIN
PART NO : 63714049013
Polishing Belt Fine Fleece Length 23-5/8 In. Width 1-3/16 In. For Use With 10F050 Polisher
price : 1,874.00 Baht / EA
recent products
-
ITEM NO : 2000485
115x3x22.23 A30TBF CUTTING DISC, T42
BRAND : YORK
PART NO : YRK2300670K
A30TBF DPC Reinforced Cutting Discs - Type 42 Manufactured to assure operator safety and optimum performance. Grade A30 - For general-purpose use on metals. Features and Benefits • Cuts very cleanly, with minimal burrs • Excels at cutting quickly through metal pipes, tubes, flat sheets and more • Incredibly durable for long-lasting performance Notes • Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°. • For use with all appropriate handheld angle grinders.
price : 53.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 6342 7 International 6342 25 -
ITEM NO : 2000772
11x25mm CYLINDRICAL BALLNOSE CARBIDE BURR CUT-9
BRAND : YORK
PART NO : YRK2101329K
Carbide Rotary Burrs - Cylindrical Ball Nosed Cylindrical Ball Nosed. All sizes are nominal with a 6mm shank unless other wise stated. Cut Numbers: Cut 3 - Rapid Cut. for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy, Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
price : 1,278.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 122 7 International 122 25 -
ITEM NO : 2001023
100x16mm F/GLASS AL/OX FLAP DISC P40
BRAND : YORK
PART NO : YRK2209420K
Conical Flap Discs, Aluminium Oxide - Fibre Backed Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive. Features and Benefits • The overlap design reduces clogging and ensures the disc always cuts effectively and • Provides a consistent finish throughout disc life • No backing pads needed Notes • Safe to use at 80m/s on any grinder Standards EN12413
price : 56.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 965 7 International 939 25 -
ITEM NO : 2001036
125x22mm F/GLASS AL/OX FLAP DISC P120
BRAND : YORK
PART NO : YRK2209650K
Conical Flap Discs, Aluminium Oxide - Fibre Backed Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive. Features and Benefits • The overlap design reduces clogging and ensures the disc always cuts effectively and • Provides a consistent finish throughout disc life • No backing pads needed Notes • Safe to use at 80m/s on any grinder Standards EN12413
price : 79.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 2046 7 International 2028 25 -
ITEM NO : 2001409
10x330mm AL/OX FILE BELTSP60
BRAND : YORK
PART NO : YRK2043270K
Aluminium Oxide Power File Belts Durable, reliable aluminum oxide power file belts - perfect for a wide range of filing applications. Features and Benefits • Ultra-durable X-Weight poly/cotton backing material • High cutting performance • Designed for a wide range of power files Typical Applications • Suitable for hard wood, low & high carbon steel, stainless steel & non ferrous metals Notes • Abrasive material: Aluminium oxide • Images for illustration purposes only
price : 4,135.00 Baht / PK of 100 PK
Stock Location QTY Lead time (Days) Local Thailand 81 7 International 81 25
