Categories 4
Product Result
-
ITEM NO : 2175000
Hoist Alignment Tool 45 Deg 1000 lb Cap
BRAND : SUMNER
PART NO : 780420
Hoist Alignment Tool Base Length (In.) 7.5 Overall Height (In.) 14 Steel Gray Steel Makes Lining Up Fittings A One-Man Operation Uses Gravity To Align Fittings For Loads Up To 45 Degrees Carries Up to 1 000 lbs (450 kg).
price : 20,779.00 Baht / EA
-
ITEM NO : 2175001
Hoist Alignment Tool 5 In 1000 lb Cap
BRAND : SUMNER
PART NO : 780425
Hoist Alignment Tool Base Length (In.) 11 Overall Height (In.) 5 Steel Gray Steel Fits All Flanges For 5 in Pipe And Larger With Bolt Holes 0.75 in to 1.625 in (19 to 42 mm). Used In Combination With Adjust-A-Fit To Bring Pipe Flanges To Exact Plumb For Tack And Weld Out Handles Up To 1 000 lbs (450 kg)
price : 15,575.00 Baht / EA
-
ITEM NO : 3047088
Inclinometer
BRAND : SUMNER
PART NO : 779546
Inclinometer
price : 4,402.00 Baht / EA
-
ITEM NO : 2456302
Sine Bar Base 5 In L 1 In H 1 In W
BRAND : TESA BROWN SHARPE
PART NO : 598-291-500
Sine Bar Accuracy Between Center .0003 in And Top Parallel To Bottom .002 In. Base Length (In.) 5 Overall Height (In.) 1 Steel Hardened Steel 1 in Wide Body Measuring Angles In Machine Setups
price : 6,749.00 Baht / EA
recent products
-
ITEM NO : 2009129
1.1/2lb BALL PEIN HAMMER,HARDWOOD HANDLE
BRAND : KENNEDY
PART NO : KEN5251150K
Ball Pein Hammers This range of ball pein hammers have been manufactured from high-grade drop forged steel that has been fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces complete by a hardwood shaft. Available in varying sizes to suit your needs. Features and Benefits • Manufactured from drop forged high grade steel making for a robust product • Head is heat treated for durability • Solid wooden handle for bolstered grip and control when wielding Typical Applications • Ideal for use with cold chisels, punches, rivets and for the shaping of metals
price : 872.00 Baht / EA
Stock Location QTY Lead time (Days) Local Thailand 175 7 International 158 25 -
ITEM NO : 2268342
Booster Pump 3 HP 3Ph 208 to 240/480VAC
BRAND : FLINT WALLING
PART NO : C22233
Booster Pump 3 HP - Pumps Voltage - Pumps 208 to 240/480VAC 3 Phase - Pumps Outlet Size - Pumps 2 in NPT Inlet Size - Pumps 3 in NPT Max Pressure - Pumps 86 psi Number of Stages - Pumps 2 Housing Material - Pumps Cast Iron Motor Enclosure - Pumps Open Dripproof 9.0/4.5 Amps 60 Hz Motor RPM 3450 Motor Type JM Continuous Duty Wetted Materials Cast Iron Stainless Steel Carbon Silicon Carbide Impeller Material Low Lead Brass Impeller Type CLOSED
price : 191,879.00 Baht / EA
-
ITEM NO : 2499982
Truck/Van Door Storage Tray Steel 20ga.
BRAND : DURHAM MFG
PART NO : 806-95
Truck or Van Door Storage Tray Width 21 In. Material Steel 20 Gauge Number of Drawers 3 Number of Shelves 1 Height 21 In. Depth 4-3/4 In. Number of Dividers 27 0 Rollers Gray Powder Coat Finish Locking System Positive Pull-Down Latches Capacity 25 lb. Resistant To Rust Acid Includes 9 Adjustable Dividers for tray Attaches To Van doors or sides Assembled/Unassembled Assembled
price : 9,018.00 Baht / EA
-
ITEM NO : 3015720
Unit Bearing Motor ECM 7/16 in L Unit
BRAND : EM S
PART NO : UTB1CB1551EM56
ECM Unit Bearing Motor ECM Motor Enclosure Design Totally Enclosed Air-Over 1/60 HP Output Watts 6 to 12 1550 Nameplate RPM Non-Standard Frame Voltage 115 Hz 60 1 Phase Full Load Amps 0.30 Motor Mounting Type Rear/Foot Auto Motor Thermal Protection Ins. Class A Motor Shaft Rotation CWLE Unit Motor Bearings Motor Service Factor 1.00 Ambient Temperature -40 to 40 Degrees C Max Ambient Temp 40 Degrees C Motor Frame Material Cast Iron Overall Length 4-1/8 In.
price : 6,713.00 Baht / EA
-
ITEM NO : 3023428
Square U-BoltInside H 6 5/8 in
BRAND : FABORY
PART NO : U17263.037.0207
U-Bolt Square Bend Low Carbon Steel Finish Zinc Thread Size 3/8 In.-16 Thread Length 3-3/4 In. Inside Length 6-5/8 In. Length (In.) 7 Inside Width 2 In. Characteristics Has Coarse Rolled Threads for Steel or Wrought Iron Pipe Sizes Includes 2 Nuts 2 Washers
price : 688.00 Baht / EA
