Welcome to QTEC-TECHNOLOGY.com
Logging to website


Please wait

close
 
{{products.length}}
  • {{data.name}}
  • {{data.name}}
 
{{products.length}}
  • {{data.name}}
  • {{data.name}}
You are here:




Product Result




recent products

  • 2024593

    3/32" x 25mm SCREWDRIVERBIT 1/4" HEX

    BRAND : KENNEDY

    PART NO : KEN5733350K

    Hex Drive Screwdriver Bits With a hardness of 58 - 62HRC, these hexagon screwdriver bits are ideal for most general purpose applications. Manufactured from a high alloy chrome molybdenum steel to ensure strength and longevity, each bit is ideal for use on both hand and power tools. Available in a varity of tip sizes to suit a range of uses. Features and Benefits • Manufactured from chrome molybdenum steel for durability • Can be used on both hand and power tools making for a versatile product • Available with varying tip sizes to allow you to select the product that best suits your needs Typical Applications • Ideal for use with hand and power tools in the following industries: • Construction • DIY • Electrical • Plumbing • Automotive • Engineering *This product is in discontinued phase. Offer valid while stocks last!.

    More Info

    price : 41.00 Baht / EA

    Stock
    Location QTY Lead time (Days)
    Local Thailand 26 7
    International 26 25
    add to cart
  • 2024971

    24"x16" RAFTERS SQUARE

    BRAND : KENNEDY

    PART NO : KEN5976950K

    Rafter's Square Constructed from hardened and tempered ground steel, this Rafter's square is a staple of any carpenter's tool kit. Graduated to 2mm on one side and 1/8" and 1/16" increments on the other for versatility of measuring, in the hands of a skilled carpenter, the simple rafter's square becomes an indispensable calculating device of immense capacity. Enabling the carpenter to easily determine the length of any common, hip, valley or jack rafter for any pitch of roof as well being able to make the proper cuts, top and bottom as well as slide or cheek cuts for any rafter. Features and Benefits • Manufactured from hardened and tempered ground steel for optimum durability • Graduated to 2mm on one side and 1/8" and 1/16" increments on the other for both metric and imperial measurements depending on your preference • Versatile in its use, as it can be used to determine the length of any common, hip, valley or jack rafter for any pitch of roof as well as making proper cuts Typical Applications • Carpentry • Joinery • Construction

    More Info

    price : 1,361.00 Baht / EA

    Stock
    Location QTY Lead time (Days)
    Local Thailand 328 7
    International 327 25
    add to cart
  • 2473913

    Angle Stop Valve Brass FIP 1/2 in.

    BRAND : KISSLER

    PART NO : 88-9360

    Angle Supply Stop Body Style - Valves Angle Finish Chrome Inlet Size 1/2 In. Inlet Type FIP Outlet Size 1/4 In. Outlet Type Compression Max Pressure 250 psi Body Material Brass Handle Material Brass Stem Material Brass Standards IAPMO/UPC/SA Listed

    More Info

    price : 741.00 Baht / EA


    add to cart
  • 2647694

    Gate Valve 1-1/4 in Flange

    BRAND : UNITED BRASS WORKS

    PART NO : 307155

    Gate Valve Valve Class Class 300 Body Material - Valves Carbon Steel Connection Type Flange Pipe Size - Valves 1-1/4 In. Max Water Pressure - CWP 750 psi Valve Max Fluid Temp 500 Degrees F Valve Stem Type Non-Rising Top of Handle to Inlet Center 10 In. Inlet to Outlet Length 9-45/64 In. Stem Material 410 Stainless Steel Wedge Material Stainless Steel Handle Material Ductile Cast Iron Handle Type Hand Wheel

    More Info

    price : 237,000.00 Baht / EA


    add to cart
  • 2901871

    Relief Valve and Tee 3 L 2-3/4 H Brass

    BRAND : RHEEM PROTECH

    PART NO : SP623335

    Relief Valve and Tee Material of Construction Brass Height (In.) 2-3/4 Length (In.) 3 For Use With Rheem Tank Water Heaters Includes Instructions Application Residential Tank Water Heater Installation

    More Info

    price : 2,602.00 Baht / EA


    add to cart