Categories 4
สินค้าที่พบ
-
ITEM NO : 2860672
Bearing Heater Cone 120V 725W 6A
BRAND : BESSEY
รหัสสินค้า : GCS-NCB
Bearing Heater Cone Bearing ID Range 3/8 in to 8-1/4 In. Voltage 120 60/50 Hz 6 Amps Watts 725 Max Temp (F) 248 Width (In.) 8-5/8 Height (In.) 9-1/2 Bearing Max Weight 15.43 lb. Includes Heat Sensitive Marking Crayon and Heat Protective Gloves Rated to 300 Degrees F. For Use With Bearings Sprockets Gears Couplings and Sleeves Standards cCSAus CE
ราคา : 43,185.00 บาท / EA
-
ITEM NO : 2725806
Bearing Heater Cross Bar 3-1/8 W
BRAND : BESSEY
รหัสสินค้า : SVH 3-1/8
Bearing Heater Cross Bar Induction Length (In.) 3-1/8 Width (In.) 3-1/8 Height (In.) 20 For Use With SVH Model Bearing Heaters
ราคา : 81,405.00 บาท / EA
-
ITEM NO : 2470769
Bearing Heater Cross Bar 9-1/4In
BRAND : BESSEY
รหัสสินค้า : SC 1-1/4
Bearing Heater Cross Bar Length (In.) 9-1/4 Width (In.) 1-1/4 Height (In.) 1-1/4 For Use With Mfr No SC 110D SC 110V SC 220V
ราคา : 9,260.00 บาท / EA
-
ITEM NO : 2860673
Cone Bearing Heater w/Temp Control Box
BRAND : BESSEY
รหัสสินค้า : GCS-CB
Bearing Heater Cone Bearing ID Range 3/8 in to 8-1/4 In. Voltage 120 60/50 Hz 6 Amps Watts 725 Max Temp (F) 248 Width (In.) 8-5/8 Height (In.) 9-1/2 Bearing Max Weight 15.43 lb. Includes Temperature Control Box and Heat Protective Gloves Rated to 300 Degrees F. For Use With Bearings Sprockets Gears Couplings and Sleeves Standards cCSAus CE
ราคา : 46,646.00 บาท / EA
สินค้าที่ดูล่าสุด
-
ITEM NO : 2314966
Gladhand Service Cast-Iron Blue
BRAND : TRAMEC SLOAN
รหัสสินค้า : 35033
Gladhand Service Port Size 1/2 In. Straight
ราคา : 2,501.00 บาท / EA
-
ITEM NO : 2688882
Cold Chisel 1-1/16 in x 9-1/4 In.
BRAND : AMPCO
รหัสสินค้า : C-18
Cold Chisel Non-Sparking Non-Magnetic Corrosion Resistant Tip Size 1-1/16 In. Length 9-1/4 In. Hex 1 In. Standard Tool (Accessory Needed for Tethering) Nickel Aluminum Bronze Material Non-Sparking Where Flammable or Combustible Vapors Liquids Dusts or Residues are Present Non-Magnetic Near Sensitive Magnetic Equipment MRI and Clean Room Environments Meets/Exceeds OSHA NFPA MSHA Federal GSA Military DOE ANSI DIN Number of Pieces 1
ราคา : 3,798.00 บาท / EA
-
ITEM NO : 2876338
Adjustment Bolt M20x1 Stainless Steel
BRAND : KIPP
รหัสสินค้า : K0692.020081
Adjustment Bolt Bolt Material Stainless Steel Bolt Finish Bright (Uncoated) Center Hole Dia 9.00mm Use with Screw Size M8 Bolt Thread Size M20x1 Bolt Outside Dia 32.00mm Min Bolt Height 35.00mm Max Bolt Height 55.00mm Shoulder Height 6.00mm Spanner Notch Width 4.00mm Spanner Notch Depth 2.00mm Max Down Force 43.4 kN
ราคา : 6,048.00 บาท / EA
-
ITEM NO : 2877245
Spring Plunger 1/2 -13 Stainless Steel
BRAND : KIPP
รหัสสินค้า : K0637.1050612
Spring Plunger Thread Size 1/2 In.-13 Thread Length 25.00mm Plunger Projection 8.00mm Stainless Steel Mounting Type Threaded Overall Length 46.80mm
ราคา : 2,373.00 บาท / EA
