Categories 4
สินค้าที่พบ
-
ITEM NO : 2954846
Lime Remover 1 gal.
BRAND : CLR PRO
รหัสสินค้า : G-I-VLR-4PRO
Rust and Lime Removers Lime Remover Chemicals For Use On Hard Nonporous Surfaces Jug 1 gal. Fragrance Unscented Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series CLR(R) Pro Lime Remover
ราคา : 4,398.00 บาท / EA
-
ITEM NO : 2954847
Lime Remover 5 gal.
BRAND : CLR PRO
รหัสสินค้า : G-I-VLR-5PRO
Rust and Lime Removers Lime Remover Chemicals For Use On Hard Nonporous Surfaces Jug 5 gal. Fragrance Unscented Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series CLR(R) Pro Lime Remover
ราคา : 19,811.00 บาท / EA
-
ITEM NO : 2230754
Rust Preventive 5 gal Bucket
BRAND : METAL RESCUE
รหัสสินค้า : DRYCOATRP5
Etchants Rust and Lime Removers Rust Preventative Chemicals For Use On Hard Nonporous Surfaces Pail 5 gal. Fragrance Unscented Ready to Use Recommended Dilution Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series No Series Application Method Spray On Coverage Varies Color Amber Application Temperature 50 Degrees F or Above VOC Content 1 Percent Rust Preventative
ราคา : 18,516.00 บาท / EA
-
ITEM NO : 2953327
Rust Remover 1 gal.
BRAND : CLR PRO
รหัสสินค้า : G-A-ERR-4PRO
Rust and Lime Removers Rust Remover Chemicals For Use On Hard Nonporous Surfaces Jug 1 gal. Fragrance Unscented Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series CLR(R) Pro Rust Remover
ราคา : 4,638.00 บาท / EA
-
ITEM NO : 2230750
Rust Remover 5 gal Bucket
BRAND : METAL RESCUE
รหัสสินค้า : METALRESCUE5GAL
Etchants Rust and Lime Removers Rust Remover Chemicals For Use On Hard Nonporous Surfaces Pail 5 gal. Fragrance Unscented Ready to Use Recommended Dilution Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series No Series Application Method Bath Soak Coverage Varies Color Clear Application Temperature 68 Degrees F or Above VOC Content 0 Percent Rust Remover
ราคา : 17,575.00 บาท / EA
-
ITEM NO : 2953328
Rust Remover 5 gal.
BRAND : CLR PRO
รหัสสินค้า : G-A-ERR-5PRO
Rust and Lime Removers Rust Remover Chemicals For Use On Hard Nonporous Surfaces Jug 5 gal. Fragrance Unscented Ready to Use Cleaner Form Liquid Primary Chemical None Chemical Series CLR(R) Pro Rust Remover
ราคา : 20,051.00 บาท / EA
สินค้าที่ดูล่าสุด
-
ITEM NO : 2000648
10x20mm CYL. CARBIDE ENDCUT BURR CUT 9
BRAND : KENNEDY
รหัสสินค้า : KEN2100240K
Carbide Burrs - Cylindrical-End Cutting Cylindrical-End Cutting. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 885.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 116 7 ต่างประเทศ 116 25 -
ITEM NO : 2000681
12x25mm ROUND TREE CARBIDE BURR CUT 3
BRAND : KENNEDY
รหัสสินค้า : KEN2103300K
Carbide Burrs - Round Tree Round Tree All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 3 - Rapid Cut For use on softer non-ferrous and plastic materials, i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 2,134.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 1 7 ต่างประเทศ 1 25 -
ITEM NO : 2000725
13x12mm INVERTED CONE CARBIDE BURR CUT 9
BRAND : KENNEDY
รหัสสินค้า : KEN2109320K
Carbide Burrs - Inverted Cone Inverted Cone. All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank. Cut Numbers: Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: Workpiece and tools should always be steady and well supported. Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'. Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 1,302.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 259 7 ต่างประเทศ 259 25 -
ITEM NO : 2000755
10mmx19mm CYLINDRICAL PLAIN END CARB' BURR DBL CUT
BRAND : YORK
รหัสสินค้า : YRK2100746K
Carbide Rotary Burrs - Cylindrical Plain End Cut 6 double cut tungsten carbide rotary burrs feature a crosscut and double cut to improve control of chipbreaks. They are manufactured from high grade tungsten carbide for general-purpose use. Features and Benefits • Tungsten carbide construction for increased strength • Crosscut and double cut improves control of chipbreaks • Ideal for general purpose machining Typical Applications • Deburring • Polishing • Cast iron • Cast steel • Carbon steel • Alloy steel • Stainless steel up to HRC65 hardness. Notes • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 997.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 359 7 ต่างประเทศ 354 25 -
ITEM NO : 2000808
12.7x22mm OVAL SHAPE CARBIDE BURR CUT-9
BRAND : YORK
รหัสสินค้า : YRK2105249K
Carbide Rotary Burrs - Oval shape Oval Shape. All sizes are nominal with a 6mm shank unless other wise stated. Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron. Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
ราคา : 1,104.00 บาท / EA
สต็อกสินค้า คลังสินค้า จำนวน ระยะเวลาจัดส่ง (วัน) ประเทศไทย 100 7 ต่างประเทศ 100 25